We would like to announce our new “Basic Sewing Machine Knowledge Technical Seminar” that will be offered in 2020 at our corporate training center located:

JUKI AMERICA INC.
8500 N.W 17th St. Suite 100
Doral, Florida 33126
Tel: (305) 594-0059

 

 Training goals with the primary focus on:

1. Basic sewing machine knowledge
2. Review of Lockstitch machine
3. Review of Overlock machines
4. Review of Bartack cycle machines
5. Introductions to digital automation sewing with programmable machines utilizing  PM-1 software and the machine panel on AMS and LK machines

 

Special pricing offer for 2020

The cost of this 5-day special training program is $ 1,500 per person. Pre-registration is required. Classes will be offered on starting dates listed below.  Prepayment is required at least 4 weeks before the seminar date. 

  •  March 23 - 27                    
  •  June 22 - 26                       
  •  September 21 - 25
  •  December – 14 to 18

Click here to download the class registration form. Once you fill out the form, email it to Ben@JUKI.com


Day 1 - Basic sewing machine knowledge

  • Operator & mechanic machine safety
  • Types of needles
  • Types of threads
  • Types of feeding systems
  • Types of machines available
  • Needle to fabric selection
  • Thread to needle selection
  • Sub- class selection. For Extra Heavy, Heavy, Medium, Light, Extra Light sewing
  • Name of components
  • Optional parts, selection
  • Machine capabilities & limitations
  • Proper Machine setup
  • Proper lubrication and greasing
  • Daily, weekly and monthly maintenance program
  • How to lookup parts and how to order parts?  
  • Understanding Instruction and Engineering Manuals for adjustments
  • Troubleshooting techniques

Day 2 - Lockstitch Machine - Standard adjustments following the Instruction book

  • What is a lockstitch machine?
  • Stitch formation
  • Oil selection and lubrication
  • Needle selections
  • Threading
  • Needle bar timing
  • Hook timing
  • Feed dog timing
  • Knife adjustments
  • Trim cam timing
  • Take up spring settings
  • Tension assembly adjustments
  • Tearing down and timing top front end of the machine
  • Trouble shooting stitch problems
  • Add on accessories

 

Day 3 - Overlock Machine - Standard adjustments following the Instruction book

  • What is an overlock chainstitch machine?
  • Stitch formation
  • Oil selection and lubrication
  • Needle selections
  • Threading
  • Needle bar timing
  • Upper looper timing
  • Lower looper timing
  • Feed dog timing
  • Upper & lower Knife adjustments
  • Chain cutter
  • Tension assembly adjustments
  • Tearing down and timing top front end of the machine
  • Trouble shooting stitch problems
  • Add on accessories

 

Day 4 – Bartack Cycle Machine - Standard adjustments following the Instruction book

  • What is a bartack cycle machine?
  • Stitch formation
  • Oil selection and lubrication
  • Needle selections
  • Threading
  • Needle bar timing
  • Hook timing
  • X & Y Feed settings
  • How to change programs and patterns
  • Upper & lower Knife adjustments
  • Parts selection for fabric 
  • Tension assembly adjustments
  • Tearing down and timing top front end of the machine
  • Trouble shooting stitch problems
  • Add on accessories

 

Day 5 -Introduction to Automation and Programmable Pattern Sewing Machine utilizing panel and PM-1 programing - Standard adjustments following the Instruction book

  • What is a programmable bartacking machine?
  • Stitch formation mechanical and digital.
  • PM-1 software stitch and pattern creation utilizing laptop and computers to transfer designs. 
  • Oil selection and lubrication
  • Needle selections
  • Threading
  • Needle bar timing
  • Hook timing
  • X & Y Feed settings
  • How to change programs and patterns
  • Upper & lower Knife adjustments
  • Parts selection for fabric 
  • Tension ASM adjustments
  • Tearing down and timing top front end of the machine
  • Trouble shooting stitch problems
  • Add on accessories

 

Questions & Answers

 

Please note: When you leave our training program we would like for you to have a basic knowledge of all items listed above. We hope you will return to your facility to implement and practice what you have learned with plans of returning for more advanced training in the future.

Click here to download the class registration form. Once you fill out the form, email it to Ben@JUKI.com